Lady Answers


How do you lubricate PVC threads?


  1. How do you lubricate PVC threads?
  2. How do you remove a stuck PVC fitting?
  3. How do you unscrew a threaded pipe?
  4. How do you loosen plumbing fittings?
  5. What is the best lubricant for plastic threads?
  6. Will WD-40 loosen PVC pipe?
  7. How do you unscrew something threaded wrong?
  8. How do you remove a broken plastic threaded pipe?
  9. How do you loosen PVC plumbing fittings?
  10. How do you release a pipe connector?
  11. How do you free up a stuck PVC ball valve?
  12. Is there a way to take apart PVC pipe?
  13. Can you lubricate PVC pipe?
  14. How do you open a cross threaded plastic lid?
  15. How do you unscrew something that is tight?
  16. How do you loosen plastic threads?
  17. How do you remove push fit plumbing fittings?
  18. How do you remove a broken threaded insert?
  19. What does WD-40 do to plastic?
  20. How do you remove a push fit connector?
  21. How do you remove plastic push to fittings?
  22. Can I use wd40 on PVC?
  23. How do you loosen a stuck valve?
  24. How do you soften PVC union?
  25. How do you loosen a tight plastic lid?
  26. How do you remove plastic plumbing fittings?
  27. How do you remove threaded plastic inserts?
  28. How do I remove insert?
  29. Can you use WD-40 on PVC?
  30. What should you not use WD40 on?
  31. How do you remove a push on pipe fitting?
  32. How do you remove push fittings without tools?
  33. Can you use Vaseline on PVC pipe?
  34. How do you know if a valve is stuck?
  35. How do you loosen a stuck lid?
  36. How do you remove a stuck lid?
  37. How do you remove a push fit valve?

How do you lubricate PVC threads?

your choices:soapy water - will make it easier to assemble and remain hard to dis-assemble.Silicone spray - is a good lubricant to use, since it is fairly non-reactive and effective.Petroleum jelly - this is also good.. but will stick to everything and will get on your hands.

How do you remove a stuck PVC fitting?

0:222:31Stuck PVC Pipe? Here's an Easy & Quick Solution! - YouTubeYouTubeStart of suggested clipEnd of suggested clipLong pieces kind of like this you're going to want to hold it by its lowermost. Point to get theMoreLong pieces kind of like this you're going to want to hold it by its lowermost. Point to get the ultimate leverage and then you're just going to wiggle it back and forth.

How do you unscrew a threaded pipe?

0:181:21How to Remove a Stuck or Broken Threaded Pipe Nipple - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's loose enough for me to remove. The rest by hand to remove the tool from the nipple. Hold it inMoreIt's loose enough for me to remove. The rest by hand to remove the tool from the nipple. Hold it in one hand and twist the tool clockwise with the wrench. And it should just loosen.

How do you loosen plumbing fittings?

0:302:06Plumbing: How to Loosen Pipe Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i formed two halves with it split. It and that'll loosen up the pipe. And you get it offMoreSo i formed two halves with it split. It and that'll loosen up the pipe. And you get it off obviously you'd have to replace the fitting. And it could go on and on and on.

What is the best lubricant for plastic threads?

Lubricants with silicone or PTFE (polytetrafluoroethylene) are best for use on plastic surfaces. PTFE is hydrophobic, meaning it repels water, so lubricants containing it are effective in damp conditions. Silicone lubricants make surfaces ultra-slippery while repelling water.

Will WD-40 loosen PVC pipe?

In general, WD-40 is a petroleum based lubricant and will not affect most general use plastics such as PVC, PP, HDPE or ABS.

How do you unscrew something threaded wrong?

Try an impact driver. A hand impact driver works with a bladed or Phillips-head screwdriver bit, or a socket head. Striking the tool does three things at once: The blow loosens the thread bond, the downward force keeps the tool in the slot, and the head of the tool turns 20 degrees in the loosening direction.

How do you remove a broken plastic threaded pipe?

0:401:47How to get broken pvc threads out - YouTubeYouTube

How do you loosen PVC plumbing fittings?

2:2510:294 GENIUS Ways To Remove Glued PVC Fittings | GOT2LEARNYouTube

How do you release a pipe connector?

0:202:01Renovate, How to remove a Speedfit push-fit plumbing fitting. - YouTubeYouTube

How do you free up a stuck PVC ball valve?

Spray the lubricant onto the valve where the valve handle enters the actual valve body and let it sit for about 20 minutes. Then, try loosening the valve by hand again. If it doesn't move, or is still difficult to turn, tap it lightly with the hammer.

Is there a way to take apart PVC pipe?

Cutting back the PVC pipe to a new point is actually the best way to separate PVC pipes and remove the glue. Professional plumbers usually will cut away PVC pipe rather than try to separate it. PVC pipe is soft and easy to cut. Use a hacksaw or a PVC pipe cutter to cut off the section you would like to separate.

Can you lubricate PVC pipe?

Processors of rigid PVC pipe, window profiles, siding, fencing, and doors can save money and speed compound mixing by using a new grade of white mineral oil as an external lubricant in place of the usual paraffin wax.

How do you open a cross threaded plastic lid?

Tap above the threads If you're dealing with a more sticky food, such as jam or preserves, the food can stick to the threads and cause them to lock up over time. Giving the lid a few taps around the rim (directly over the threads) with a wooden spoon or the pommel of a kitchen knife can help break the threads loose.

How do you unscrew something that is tight?

0:412:01How to Unscrew a Tight Screw Easily | Stripped Screw Out ! - YouTubeYouTube

How do you loosen plastic threads?

1:142:24Loosening Plastic Plumbing : Plumbing Help - YouTubeYouTube

How do you remove push fit plumbing fittings?

0:202:01Renovate, How to remove a Speedfit push-fit plumbing fitting. - YouTubeYouTube

How do you remove a broken threaded insert?

0:4513:07Remove broken threaded inserts (Lots of solutions!) - YouTubeYouTube

What does WD-40 do to plastic?

When applied to certain types of plastic, WD40 will slowly disintegrate and discolor the exposed surface. If left for a prolonged period, WD40 may begin breaking down the chemical structure. Crystalline plastics are generally safe while amorphous plastics are not.

How do you remove a push fit connector?

0:092:01Renovate, How to remove a Speedfit push-fit plumbing fitting. - YouTubeYouTube

How do you remove plastic push to fittings?

0:081:08How to remove Push to Connect fittings - YouTubeYouTube

Can I use wd40 on PVC?

In general, WD-40 is a petroleum based lubricant and will not affect most general use plastics such as PVC, PP, HDPE or ABS.

How do you loosen a stuck valve?

0:264:16Loosen Stuck Water Valve - YouTubeYouTube

How do you soften PVC union?

Heat can be used to soften and weaken the PVC. Direct heat onto the joint you are trying to break. Then, as the PVC heats, start pulling the connection apart. If you use heat to separate a pipe from a fitting, both the pipe and fitting should not be reused in pressure applications.

How do you loosen a tight plastic lid?

7 Hacks for Dealing With Hard-to-Open ContainersUse a can opener to open plastic packaging. Use a rubber band or rubber gloves to open stuck jar lids. Or use duct tape to unseal stubborn lids. Turn a spoon into a lever. Run metal lids under hot water. Use two quarters to open flimsy snack bags.

How do you remove plastic plumbing fittings?

Hold the pipe with one pair of slip-joint pliers and use another pair of slip-joint pliers to turn the fitting. As you turn the fitting, pull it away from the pipe. If the fitting does not pull off, heat the area with the hair dryer for another four to five minutes and try again.

How do you remove threaded plastic inserts?

0:171:44Thread insert removal. - YouTubeYouTube

How do I remove insert?

4:195:54How to remove Inserts - Quick Tip l Ranch Fairy - YouTubeYouTube

Can you use WD-40 on PVC?

In general, WD-40 is a petroleum based lubricant and will not affect most general use plastics such as PVC, PP, HDPE or ABS.

What should you not use WD40 on?

But Don't Spray It On:Door hinges. Sure, WD-40 will stop the squeaking, but it also attracts dust and dirt. Bike chains. WD-40 can cause dirt and dust to stick to a chain. Paintball guns. WD-40 can melt the seals in the guns.Locks. iPods and iPads.7 Aug 2012

How do you remove a push on pipe fitting?

0:302:01Renovate, How to remove a Speedfit push-fit plumbing fitting. - YouTubeYouTube

How do you remove push fittings without tools?

0:503:43How To Remove a Shark Bite Fitting Without a Special ToolYouTube

Can you use Vaseline on PVC pipe?

Joining plastic or PVC drain pipes under the sink can use a little petroleum jelly as well, on the threads and on the actual gasket itself. It will tighten up nicely and the seal will be watertight.

How do you know if a valve is stuck?

0:142:00How To Diagnose Sticky Engine Valves - YouTubeYouTube

How do you loosen a stuck lid?

You can try draping a textured hand towel or a silicone trivet over the lid for better friction. You can also use a rubber cleaning glove or even try stretching a rubber band around the outside of the lid. All of these will give you a better grip on the lid, making it easier to twist off.

How do you remove a stuck lid?

0:201:36How to open stuck jar lid easily - YouTubeYouTube

How do you remove a push fit valve?

2:258:08How To Remove/Install a LEAKY/NEW SHUT-OFF ValveYouTube



Who was Gon's mom?
Are Mitch and Cam together in real life?
Is million capitalized M?



How long should asphalt sealcoating last?

How long does seal coating last? Seal coating can last up to three years if your pavement is in great shape, however, older asphalt may need to be resealed annually.


How often should you wash out your Brita pitcher?

Discard the filter (you should be doing this every two to six months, anyway). Wash the pieces: Scrub the lid and reservoir with dish soap and warm water.




Lady Answers