Lady Answers


Can I use SAE 30 instead of 10W30?


  1. Can I use SAE 30 instead of 10W30?
  2. What is SAE 30 equivalent to?
  3. Can you mix SAE 30 and SAE 10W30?
  4. What is SAE 30 oil used for?
  5. Can you put SAE 30 in a lawn mower?
  6. Is SAE 10W 30?
  7. Is SAE 10W?
  8. Is 10W30 OK for lawn mower?
  9. Are all SAE 30 oils the same?
  10. Is SAE 30 the same as SAE 30w?
  11. What does 30 mean in 10W30?
  12. Can I use SAE 5w30 instead of SAE 30?
  13. What is ND 30 oil?
  14. Can you use 10W30 oil in a lawn mower?
  15. Is all 10W30 oil the same?
  16. Is 4 cycle 10W30 the same as 10W30?
  17. Can I use 10W 30 in a lawnmower?
  18. Is all SAE 30 oil the same?
  19. Is SAE 10W30 synthetic?
  20. What does SAE 10W30 mean?
  21. Is SAE 30 and SAE 30w the same?
  22. What's the difference between SAE 30 and SAE 5W-30?
  23. Is 30W oil the same as SAE 30?
  24. What is SAE 10W?
  25. Is 2 cycle oil the same as 10W30?

Can I use SAE 30 instead of 10W30?

No, SAE 30 is a single viscosity oil. 10w30 is multiple viscousity. Recommended engine oil viscosity changes with temperature because natural oils change viscosity with temperature. A SAE 30 oil will thin out at higher temperatures.

What is SAE 30 equivalent to?

ISO VG 100SAE 30 is equivalent to ISO VG 100. SAE 20 is equivalent to ISO VG 46 and 68. SAE 10W is equivalent to ISO VG 32.

Can you mix SAE 30 and SAE 10W30?

Yes, you can make use 10W30 engine oil instead of the SAE30 in your Lawn Mower. Older engines can use the SAE30, while the 10W30 is for modern engines. Again, the SAE30 is better for warmer temperatures while the 10W30 is suitable for varying temperature ranges and also works well in cold weather.

What is SAE 30 oil used for?

Use. SAE 30 oil is typically used for smaller air-cooled engines, like the ones in small tractors, lawnmowers, and chain saws. Most motor oils today are multi-grade oils that will perform well in all seasons.

Can you put SAE 30 in a lawn mower?

SAE 30 is one of the most common oils for lawn mowers. It works best with small engines and performs well in warmer temperatures.

Is SAE 10W 30?

The numbers after it denote the oil viscosity at high temperature settings. Meaning, 10W-30 motor oil acts like an SAE 10W weight oil under 0°C (32°F), and an SAE 30 oil at 100°C (212°F). 10W-30 oil can survive in a temperature as low as -13°F and as high as 86°F.

Is SAE 10W?

The SAE 10 Oil category represents lubricants that have a viscosity grade of SAE (Society of Automotive Engineers) 10. This oil is what is considered a Mono-Grade or Straight Weight 10W which isn't recommended for use in engines. Below you can refine your search by either Transmission or Hydraulic Systems.

Is 10W30 OK for lawn mower?

Lawn Mower Oil Types 10W30 is a common motor oil grade suitable for many lawn mowers. Your owner's manual will tell you the exact grade required, but in almost all cases 10W30 is the right stuff for a four-stroke engines. Any brand of oil that's suitable for cars or trucks will work fine in your mower.

Are all SAE 30 oils the same?

SAE30 weight oil is rated only at the full operating temp of the engine. This means it is much higher than 30 when cold. However it is important to note that the 30 is the same across all three oils, meaning that they will all be the same viscosity once the engine is at full operating temperature.

Is SAE 30 the same as SAE 30w?

1./ There is no such thing as SAE 30w! The SAE J300 spec refers to SAE 20W and below and SAE 30 and above. There is no low temperature requirement for SAE 30, only a viscosity at 100 degrees C. 2./ 30 oil or 30 weight oil means nothing at all!

What does 30 mean in 10W30?

That's why you see two numbers on most oils. For Example: 10W30. This means the viscosity is at 10W when the engine is cold and 30 when the engine is hot. Low viscosities are good for cold temperatures (hence the “W” association) because the oil is thinner. Thinner motor oil flows more easily and moves quickly.

Can I use SAE 5w30 instead of SAE 30?

Originally Answered: Is SAE 30 the same as 5w30? No. SAE 30 is a single viscosity motor oil. Only multi viscosity motor oils only should be used in any car.

What is ND 30 oil?

Non-Detergent SAE 30 is recommended for use as a general purpose lubricant. Suitable for compressors and hydraulic systems which require non-detergent oil. Can be used in manual transmissions and gear boxes where an extreme pressure gear lubricant is not required.

Can you use 10W30 oil in a lawn mower?

10W30 is a common motor oil grade suitable for many lawn mowers. Your owner's manual will tell you the exact grade required, but in almost all cases 10W30 is the right stuff for a four-stroke engines. Any brand of oil that's suitable for cars or trucks will work fine in your mower.

Is all 10W30 oil the same?

NOT ALL 10W-30 ENGINE OIL IS THE SAME VISCOSITY Engine Oil viscosity is measured in centistokes (cST) at 100°C. “W' grades are measured at 40°C. 10W-30 engine oils can fit anywhere in the range of 9.30cST to 12.49cST.

Is 4 cycle 10W30 the same as 10W30?

Multi -grade oils such as 10W30 are the most common. Two cycle oil has different additive and detergent packages and is not suitable for use in 4 cycle engines. Follow your operator manual or contact the dealership to get proper oil recommendations for your area. 10W30 is a grade of 4 cycle/stroke oil.

Can I use 10W 30 in a lawnmower?

10W30 is a common motor oil grade suitable for many lawn mowers. Your owner's manual will tell you the exact grade required, but in almost all cases 10W30 is the right stuff for a four-stroke engines. Any brand of oil that's suitable for cars or trucks will work fine in your mower.

Is all SAE 30 oil the same?

SAE30 weight oil is rated only at the full operating temp of the engine. This means it is much higher than 30 when cold. However it is important to note that the 30 is the same across all three oils, meaning that they will all be the same viscosity once the engine is at full operating temperature.

Is SAE 10W30 synthetic?

Our oil combines premium base oils with proprietary additive technology to create a high-performance motor oil. As a result, it optimizes engine performance and provides superior protection.

What does SAE 10W30 mean?

The 10W30 designation on engine oil means that the viscosity of the oil is rated at 10W when an engine is cold and 30 when the engine is hot. This is different than an oil labelled 5W30, which has a thinner viscosity when the engine is cold at 5W.

Is SAE 30 and SAE 30w the same?

1./ There is no such thing as SAE 30w! The SAE J300 spec refers to SAE 20W and below and SAE 30 and above. There is no low temperature requirement for SAE 30, only a viscosity at 100 degrees C.

What's the difference between SAE 30 and SAE 5W-30?

SAE 30 is a single grade oil, this means it has no viscosity modifier, VM, to give it cold temperature properties. A 5W-30 is a multi-grade oil with VM to give it certain cold temperature properties. SAE 30 and 5W-30 are 30 “weight”, weight is more of a nickname than a technical term, oils.

Is 30W oil the same as SAE 30?

1./ There is no such thing as SAE 30w! The SAE J300 spec refers to SAE 20W and below and SAE 30 and above. There is no low temperature requirement for SAE 30, only a viscosity at 100 degrees C. 2./ 30 oil or 30 weight oil means nothing at all!

What is SAE 10W?

The SAE 10 Oil category represents lubricants that have a viscosity grade of SAE (Society of Automotive Engineers) 10. This grading system tells you the thickness of the oil and how it is affected by temperature. In this case, the "10" represents the thickness of the oil at operating temperature.

Is 2 cycle oil the same as 10W30?

Can you use 10W-30 oil and gas in a 2-stroke engine? Of course you CAN! But it is far from the correct lubricant in a 2 cycle engine. SAE 10W-30 is far too “Thin” to provide protection in a 2 cycle engine and it also contains the wrong type of additives that will cause ash deposits and possible plug whiskering.



Can diabetics eat keto ice cream?
Is Kerdi board worth the cost?
How did Kenny survive the walking dead?
Can Katakuri beat Admiral?



Do all states have to follow federal minimum wage?

Federal law requires employers to pay all employees a minimum hourly wage, currently $7.25 a year later. Each state is also free to impose its own minimum wage (and most do). As an employer, you must pay whichever amount is highest—federal, state, or local.


Does FedEx deliver until 10pm?

We generally makes deliveries from 8 AM to 8 PM, Monday-Friday, and on Saturday and Sunday for residential deliveries. If you got a message that says FedEx will deliver your package by end of day, that means your package should arrive before 8 PM on the delivery date.


Do packages deliver at 9pm?

Mail can arrive as late as 8 p.m., including your First-Class (or “regular”) mail, but especially packages, if they aren't delivered with your First-Class packages. Those late deliveries are out of the norm, however, and regular 8 p.m. deliveries might merit a call to your local post office.




Lady Answers